BQ PLA Aubergine 1.75mm 300g filament Easy Go
BQ PLA Easy Go
The Easy Go system combines the exclusive design of BQ its reels with one of the fastest and most innovative wrapping systems in the world: the Fiber optic sensors determine the exact position of the reel and align it to the line of the windings where the filament is wound on at onespeed and with an axis movement that is calculated down to the millimeter. This results in an optimal role of PLA filament with which it effortlessly unwinds during 3D printing.
BQ PLA Filament Aubergine, easy to use
PLA (polylactic acid) is the most practical material to use in your 3D printer when venturing in it for the first time. It is easy to work with, offers excellent adhesion and is suitable for long-lasting prints.
|It solidifies quickly.|
|During the printing process, each layer must have cooled sufficiently before the print head deposits another layer of melted filament on top. Given our PLA solidifies quickly it provides better print quality for small-volume pieces without sacrificing speed.|
|Minimum deformation due to thermal stress.|
|Thermal stress is produced by temperature inequalities in various points of an object. In 3D printing, this results in the bulging of the first layers due to the thermal difference between the bed (room temperature) and the filament (about 190-220ºC). The thermal-stress deformation of our PLA is minimal, which helps reduce warping.|
|Excellent adherence even without a heated bed. .|
|Using only the typical adhesion methods like 3DLac or a fixpads, our PLA offers excellent adherence even without a heated bed.|
BQ PLA Filament, Biodegradable, ideal for domestic use.
BQ produces its own PLA filament in Huesca (Aragon). A spool of BQ PLA 1.75mm filament contains 100% PLA of a high quality. This completely biodegradable material is produced without the use of petroleum derivatives. PLA is generated by the polymerization of lactic acid from the fermentation of vegetable-derived sugars. Unlike other materials, it does not spread unpleasant odors making it ideal for domestic use.
|The printing temperature range is between 200 and 220ºC.|
|Our PLA melts in the hot-end starting from 175ºC, however, due to possible variations in the temperature measurement and regulation of your printer's hot-end, we recommend printing at above 200ºC*.|
|The ideal print temperature is 205ºC.|
|Through subjecting our PLA to exhaustive tests we have ascertained that the best print quality/speed ratio is achieved at 205ºC.|
*: The optimal printing temperature will vary depending on the 3D printer being used and the chosen printing speed.
BQ PLA 1.75mm Filament, distinctiveness
Compared with other PLA filament this bq PLA filament characterizes by the following properties;
- 100% Organic by the addition of biological dye instead of chemical dyes
- Very good price / quality ratio.
- Aubergine - Pantone 7645C
- 1 Kg
- Filament diameter
- Spool size (diameter x width)
- 140 x 45 mm
- Spool axle diameter
- 44 mm
- 145 x 145 x 50 mm
- 100% PLA (Polylactic acid)
- Optimum printing temperature
- 205 ºC
- Printing temperature range
- 200-220 ºC
Here you can add custom original content(text, images, videos and more) for each product page.